#1 SIDE MOUNT BASE MOUNT - BLACK

Your Price: $21.95

Retail Price:$29.99

You Save:$8.04(27%)

Weaver #1 Side Mount base. Side mount brackets detach and attach in seconds. Mauser Swedish with receiver ring about 1.300" dia.; Remington 700 & 78 Long Actions; 40X-L; 721, 725; 700 & 78 Short Actions; 7, 600, 660, XP-100; 720; Savage 20+, 340, 340E, 342, 840, 843E, 110 E & S, 111 112 RV & FV, 116; Winchester 54, Early Model 70 (Below serial #66, 350); 70 Long & Short act. 670, 770

Part Number: 48401

Availability: Out of Stock.

Description

Features and Specifications:

Side mount brackets detach and attach in seconds.
Made in USA

Used on the Following Firearms:

Mauser Swedish with receiver ring about 1.300" dia.

Remington 700 & 78 Long Actions; 40X-L; 721, 725; 700 & 78 Short Actions; 7, 600, 660, XP-100; 720

Savage 20+, 340, 340E, 342, 840, 843E, 110 E & S, 111 112 RV & FV, 116

Winchester 54, Early Model 70 (Below serial #66, 350); 70 Long & Short act. 670, 770

May require bolt and/or safety alteration.

Installation Instructions:

1. Clean firearm receiver, receiver base holes, and all mount parts thoroughly.

2. Use a correct size screwdriver to attach base tightly to receiver. Many gunsmiths also apply a small drop of thread adhesive to the base screws. (Do not allow thread adhesive to go through into the action). Thread adhesive is not needed on 22 rifles.

3. Place mount ring saddles (bottom portion of mount) on the base(s) and push forward so that the saddle crossbolt contacts the forward edge of the groove in the mount base. tighten saddle to a base with a coin or screwdriver.

4. Place scope in saddle and position for eye relief. (Refer to scope instructions for correct eye relief).

5. Place mount ring caps (upper portion of the mount ring assembly) on the scope and slide them over the saddle so that caps and saddle become a single unit.

6. Make sure crosshairs are vertical/horizontal. Tighten the four ring cap screws evenly until the caps hold the scope tube securely. Do not overtighten to prevent scope tube damage,

7. Firearm in now ready for bore-sighting. Refer to scope instructions for correct procedures.

Model: Weaver 48401

SHOOTER'S STICK - EXTENDS 17" - 36"

The Shooter’s Stick provides a lightweight, portable rest that’s perfect for turkey hunting or any ground-based shooting. With a pair of quick-release leg locks, the heavy-gauge, lightweight aluminum shaft quickly adjusts from 17 to 36 inches in length.

$19.95

Out of Stock.

Add To Cart

EZ-AIM HARDROCK AR500 ROUND SPINNER TARGETS & STAND

The EZ-Aim™ Hardrock AR500 Round Spinner Targets & Stand feature a portable, 1/4-inch armor plate shooting system, capable to hold up to hundreds of shots, providing you the tools needed to sharpen your skills. Used with rimfire rounds and centerfire pistols, our system is designed to adapt for use with the EZ-Aim Custom Target System.

$49.95

In Stock.

Add To Cart

BUCKLINE RIFLE SCOPE - 3-9X40 W/ SCOPE RINGS

The BUCKLINE™ scope series offers high-value performance for standard hunting applications. Variable 3-9x models feature a bullet drop-compensating dot reticle, and are available in 40mm objective lens configurations. All BUCKLINE models include Weaver-style scope rings.

$59.95

Out of Stock.

Add To Cart

#1 SIDE MOUNT BASE MOUNT - BLACK

Accessories

Recently Viewed Items