.308 / 7.62 TRIPLE PORT MUZZLE BRAKE - M18 x 1 RH THREAD

The quality of these brakes is on par with the brakes we carry from our Canadian-made suppliers.

This is the Triple Port design - similar to the classic Miculek-style brake (and very similar to the Colonel Mustard brakes that we have sold for years - but with a better finish).

Some Tikka's use this thread size - if you have other calibres smaller or the same size as .308 (like 300 Win Mag) this brake will work for those calibres too.

• Screws onto the uncommon M18 x 1 RH threaded barrels (with .308 / 7.62 bore)

• Muzzle brake has three chambers with 8 ports (two on the top) that direct the exiting propellant gasses upwards and to both sides to reduce muzzle climb and felt recoil - allowing for faster follow-up shots

• There are no open ports on the bottom of the muzzle brake core - this will reduce the dust signature when firing prone

• CNC machined steel construction with smooth black Nitride coating

• All of our other brakes come with a crush washer and jam nut included

• Dimensions: 2.24" x 0.94" x 0.94"

• Weight: 3.32 oz. (94g)

We recommend a screwdriver with a few wraps of duct tape around the shaft - insert through the 'gills' of the brake and then twist on to crush the washer and keep it all straight and tight. Just ensure that you don't turn too far - if you back off you will need a new crush washer! See pic for correct install orientation.