AR-15 / AR-10

M-16 / AR-15 Owners Manual Contains in depth information including chapters on general repair and maintenance, armorer repair, material utilization, final inspection, repair, refinishing, and reassembly, ect... Appendices include armorer's tools, replacement parts list, and a complete numeric parts list.

This Stryke Single Bungee Conversion Sling features 1.25-inch webbing with strong Duraflex buckles. Black.

This Stryke Single Bungee Conversion Sling features 1.25-inch webbing with strong Duraflex buckles. Olive Drab Green.

Timber Creek Outdoors QD Mounting Point adds a forward attachment place for QD sling swivels on M-Lok handguards / systems - keeps the swivel from rotating with four fixed positions. CNC machined out of aircraft grade billet aluminum. Made in the USA. Lifetime Warranty. Purple Anodized. TCO M QD MP PPA.

Timber Creek Outdoors QD Mounting Point adds a forward attachment place for QD sling swivels on M-Lok handguards / systems - keeps the swivel from rotating with four fixed positions. CNC machined out of aircraft grade billet aluminum. Made in the USA. Lifetime Warranty. Blue Anodized. TCO M QD MP B.

Timber Creek Outdoors QD Mounting Point adds a forward attachment place for QD sling swivels on M-Lok handguards / systems - keeps the swivel from rotating with four fixed positions. CNC machined out of aircraft grade billet aluminum. Made in the USA. Lifetime Warranty. Orange anodized with clear cerakote. TCO M QD MP OA.

Timber Creek Enforcer Mini will mount to any Picatinny rail and is designed to fit your hand more comfortably than others. This skeletonised foregrip is CNC machined from a solid block of aircraft grade billet aluminum. Made in the USA. Lifetime Warranty. Flat Dark Earth Cerakote finish. TCO EM AFG FDE.

Timber Creek Enforcer Mini Angled Foregrip mounts to any M-LOK handguard / system as a standard foregrip or as a hand stop. This skeletonised foregrip / handstop is CNC machined from a solid block of aircraft grade billet aluminum. Made in the USA. Lifetime Warranty. Blue Anodized with Clear Cerakote. TCO M EM AFG B.

Timber Creek Enforcer Mini Angled Foregrip mounts to any M-LOK handguard / system as a standard foregrip or as a hand stop. This skeletonised foregrip / handstop is CNC machined from a solid block of aircraft grade billet aluminum. Made in the USA. Lifetime Warranty. Orange Anodized. TCO M EM AFG OA.

Timber Creek Enforcer mounts to any M-LOK handguard / system as a standard vertical foregrip or as a hand stop. This skeletonised foregrip is CNC machined from a solid block of aircraft grade billet aluminum. Made in the USA. Lifetime Warranty. Black Cerakote finish. TCO M E VFG BL.

Timber Creek Enforcer mounts to any Picatinny rail as a standard vertical foregrip or as a hand stop. This skeletonised foregrip is CNC machined from a solid block of aircraft grade billet aluminum. Made in the USA. Lifetime Warranty. Orange Anodized. TCO E VFG OA.

This Timber Creek Outdoors 3 slot rail section is compatible with any M-LOK system and creates a space for mounting accessories. CNC machined out of aircraft grade billet aluminum. Made in the USA. Lifetime Warranty. Blue Anodized. TCO M 3S PR B.

This Timber Creek Outdoors 3 slot rail section is compatible with any M-LOK system and creates a space for mounting accessories. CNC machined out of aircraft grade billet aluminum. Made in the USA. Lifetime Warranty. Burnt Bronze Cerakote. TCO M 3S PR BB.

This Timber Creek Outdoors 3 slot rail section is compatible with any M-LOK system and creates a space for mounting accessories. CNC machined out of aircraft grade billet aluminum. Made in the USA. Lifetime Warranty. Purple Anodized. TCO M 3S PR PPA.

This Timber Creek Outdoors 3 slot rail section is compatible with any M-LOK system and creates a space for mounting accessories. CNC machined out of aircraft grade billet aluminum. Made in the USA. Lifetime Warranty. Orange Anodized. TCO M 3S PR OA.

This Timber Creek Outdoors 3 slot rail section is compatible with any M-LOK system and creates a space for mounting accessories. CNC machined out of aircraft grade billet aluminum. Made in the USA. Lifetime Warranty. OD Green Cerakote. TCO M 3S PR OD.

This Timber Creek Outdoors 3 slot rail section is compatible with any M-LOK system and creates a space for mounting accessories. CNC machined out of aircraft grade billet aluminum. Made in the USA. Lifetime Warranty. Flat Dark Earth Cerakote. TCO M 3S PR FDE.

This Timber Creek Outdoors 5 slot rail section is compatible with any M-LOK system and creates a space for mounting accessories. CNC machined out of aircraft grade billet aluminum. Made in the USA. Lifetime Warranty. Blue Anodized. TCO M 5S PR B.

This Timber Creek Outdoors 5 slot rail section is compatible with any M-LOK system and creates a space for mounting accessories. CNC machined out of aircraft grade billet aluminum. Made in the USA. Lifetime Warranty. Orange Anodized. TCO M 5S PR OA.

This Timber Creek Outdoors 5 slot rail section is compatible with any M-LOK system and creates a space for mounting accessories. CNC machined out of aircraft grade billet aluminum. Made in the USA. Lifetime Warranty. Red Anodized. TCO M 5S PR R.

Timber Creek Enforcer Mini will mount to any Picatinny rail and is designed to fit your hand more comfortably than others. This skeletonised foregrip is CNC machined from a solid block of aircraft grade billet aluminum. Made in the USA. Lifetime Warranty. Red anodized with clear Cerakote. TCO EM AFG R.

Timber Creek Enforcer Mini will mount to any Picatinny rail and is designed to fit your hand more comfortably than others. This skeletonised foregrip is CNC machined from a solid block of aircraft grade billet aluminum. Made in the USA. Lifetime Warranty. Black Cerakote finish. TCO EM AFG BL.

The Timber Creek Outdoor AR Lower Parts Kit is the perfect start to any MSR build. Made in the USA. Lifetime Warranty. Red anodized. TCO AMBI SS R.

The Timber Creek Outdoor AR Lower Parts Kit is the perfect start to any MSR build. Made in the USA. Lifetime Warranty. Black Type III Hard anodised billet aluminum. TCO AMBI SS BL.

The TRUGLO 1/2" Picatinny Riser Mount is the perfect way for you to raise your optic to get that perfect sight alignment. The riser mount raises mounting surface by 0.5". TG8970B.

It is generally accepted that one should not drop the firing pin on an empty chamber, which is the primary reason to have Snap Caps for your favourite guns. You should always use Snap Caps when checking or adjusting the trigger pull. If you prefer to release the tension on the hammer springs, when storing your guns, Snap Caps are ideal. Fits 308 Winchester / 7.62x51, 2 pack.

Designed for the AR-15 platform and installed into the upper receiver, this ambidextrous charging handle out-performs the traditional variation by utilizing a hidden spring mechanism which locks via the insertion channel. The design of the Latchless Charging Handle promotes longevity, carries high-efficiency gas vents, accepts the ISO-Tab extension tabs and the ambidextrous handle is designed to not snag or hang-up on the user or gear.

This receiver end plate with a sling slot allows you to attach a single point or a two point sling for a more permanent setup for your rifle. Perfect for right handed shooters!

Blazing target acquisition. Peak accuracy. And bright enough to hunt even the thickest woods. You’ll only find this level of performance in our Trophy TRS-25 Red Dot Sights. Each comes in a strong, precision-engineered housing that’s tough enough to go anywhere. These sights offer unlimited eye relief for fast shots at imperfect angles and multiple brightness settings for maximum battery life and superior performance in a variety of lighting conditions.

Constructed of Phosphor Bristles in chamber area and stainless steel bristles in locking lug area. These Hoppe's brushes are specifically designed for AR style chambers. The double diameter design cleans recessed areas to remove carbon and powder residue.

Constructed of Phosphor Bristles in chamber area and stainless steel bristles in locking lug area. These Hoppe's brushes are specifically designed for AR style chambers. The double diameter design cleans recessed areas to remove carbon and powder residue.

Condor Outdoor 3 Point Sling. Multiple attachment adapters, 1.5" wide webbing. Black. 3PS-002.

This Stryke Single Bungee Conversion Sling features 1.25-inch webbing with strong Duraflex buckles. Coyote Brown.

Timber Creek Outdoors Low-Profile Bipod Mount - M-Lok - Compatible with all Harris Style Bipods. Low profile allows you to leave the mount in place when not using your bipod. CNC machined out of aircraft grade billet aluminum. Made in the USA. Lifetime Warranty. Burnt Bronze cerakote finish.

OverMolded Collapsible Buttstock. Fits: ARs. Mil-spec. Pink.

This Stryke Single Bungee Conversion Sling features 1.25-inch webbing with strong Duraflex buckles - converts from two point to single point sling. HK snap hook adapter covered with elastic sleeve. MultiCam.

Scorpion Optics Venom Max Scope 1-8x24 IR. Weather and shockproof, red/green adjustable intensity illuminations, 30mm one piece aircraft grade aluminum tube, dry nitrogen purged and filled, range > dial > shoot sytem.

The Timber Creek Outdoors AR-10 Billet Dust Cover is made out of CNC machined aircraft grade aluminum and available in many colours to customize your next AR build. As a replacement for any Mil-Spec ejection port cover, the Timber Creek BDC is desigined to reduce weight. Purple Anodized.

The Timber Creek Outdoors AR-10 Billet Dust Cover is made out of CNC machined aircraft grade aluminum and available in many colours to customize your next AR build. As a replacement for any Mil-Spec ejection port cover, the Timber Creek BDC is desigined to reduce weight. Orange Anodized.

The Timber Creek Outdoors AR-10 Billet Dust Cover is made out of CNC machined aircraft grade aluminum and available in many colours to customize your next AR build. As a replacement for any Mil-Spec ejection port cover, the Timber Creek BDC is desigined to reduce weight. Black.

TCO Steel Castle Nut is a Mil-Spec castle nut for use with AR-15 carbine receiver extensions. Made in the U.S.A.

The Truglo 45 degree offset riser mount is ideal for the individual who needs to mount a small Red dot optic or Mechanical sight onto a Picatinny rail. TG8975B.

The TRUGLO 0.5" Picatinny Riser Mount is the perfect way for you to raise your optic to get that perfect sight alignment. The riser mount raises mounting surface by .5". TG8972.

The Condor Transporters discreet design hides your AR-15 Carbine in plain sight. The 164 features a padded interior with a removable divider to separate the upper and lower receivers with a padded mesh back to maximize airflow.

Timber Creek 15" Ultralight Enforcer Handguard has M-LOK attachment points to work with other M-LOK accessories. 20% Lighter than our standard 15” Handguard. - skeletonised handguard is CNC machined from a solid block of aircraft grade billet aluminum. Made in the USA. Lifetime Warranty. Red.

The Condor Swiftlink Bungee Sling is the perfect tactical rifle sling. An adaptable, combat-ready solution for your rifling needs. Coyote Brown.

Included high and low mounting bases, TRU•TEC™ 20mm is the go-to dot optic for nearly any firearm system. Motion-sensitive auto-on and a programmable auto-off for years of reliable battery life.

A morale patch featuring the phrase "Come and Take It" as well as the outline of a scary-looking rifle. Desert colouring.