We have our own-brand products produced for us which includes our very popular Muzzle Brakes, Flash Hiders, Thread Protectors, Crush Washers and Jam Nuts as well as other uncommon items like IDPA Targets, buttstocks, grips, gas tubes, picatinny rails, etc. and of course Gift Cards!
If you haven't checked out our muzzle device offering lately, you may be pleasantly
surprised as we have some less usually found thread / calibre
combinations, all high quality and all with our usual great value:
Brakes / Flash Hiders
M14x1 RH - .308 / 7.62; .223 / 5.56
M14x1 LH - .308 / 7.62
M15x1 - .308 / 7.62
M18x1 - .308 / 7.62
1/2"x20 - .223 / 5.56 (also good for .22 LR)
1/2"x28 - 9mm; .223 / 5.56
1/2"x36 - 9mm
5/8"x24 - 6.5 Grendel / Creedmoor; .270 / 7mm; .308 / 7.62; 9mm; up to .375
This is the '4 Gill' design - a very distinctive longer profile with 4 angled-back gills on each side together with 2 'nostrils' at 10 and 2 o'clock. Made of stainless steel that then receives a black Nitride coating. Screws onto standard M14 x 1 threaded barrels (with 5.56 / .223 bore). Includes crush washer and jam nut. CMMB314SSBKMB.
Colonel Mustard muzzle brake designed for 5.56 calibre. Screws onto standard M14 x 1 threaded barrels (with 5.56mm bore) - as used on the VZ. 58 and derivatives, such as the CZ 858 - this is a Right Hand (RH) thread. Includes crush washer and jam nut. CMMB11522314RH.
Designed for the AR-15 platform and installed into the upper receiver, this ambidextrous charging handle out-performs the traditional variation by utilizing a hidden spring mechanism which locks via the insertion channel. The design of the Latchless Charging Handle promotes longevity, carries high-efficiency gas vents, accepts the ISO-Tab extension tabs and the ambidextrous handle is designed to not snag or hang-up on the user or gear.
M-16 / AR-15 Owners Manual Contains in depth information including chapters on general repair and maintenance, armorer repair, material utilization, final inspection, repair, refinishing, and reassembly, ect... Appendices include armorer's tools, replacement parts list, and a complete numeric parts list.
This is a "direct and general support maintenance manual" for the .45 caliber (sic) M1911A1 pistol - reprinted from TM 9-1005-211-34 - the 1964 manual. It also includes supplemental material from the Army Technical Manual TM 9-1005-211-12. Colonel Mustard CM1911A1Man.
Stainless Steel Crush Washer for neat fitting of muzzle brake / compensator to AR-15 or other 5.56 / .223 / .22 / 9mm rifles, carbines or pistols utilising standard 1/2"x28 or 1/2"x36 thread. CMARMBCWSS.
Colonel Mustard thread protector. An elegant and useful item to protect your threaded barrel for when you don't want to use a muzzle brake or flash hider. Screws onto standard AR-15/M4/M16 ½" x 28 threaded barrels. This thread is also commonly used on .22 LR, .22 Mag and .17 HMR rifles. Black. CMJLN-T001MB.
Colonel Mustard thread protector. An elegant and useful item to protect your threaded barrel for when you don't want to use a muzzle brake or flash hider. Screws onto 5/8" x 24 threaded barrels. Black. CMJLN-T002MB.