Made in Canada - Colonel Mustard loves supporting awesome Canadian manufacturers!
Maple Ridge Armoury are a boutique, high quality firearms parts and accessory manufacturer based in Barrie, Ontario.
Maple Ridge Armoury Defiant Brake - 1/2" x 28 Thread
A compact, functional brake that avoids the need for top vents by the slightly angled impact faces. The parallelogram-shaped slots are located slightly above the centreline to provide a larger surface area on the bottom side, to provide even more downforce on your muzzle!
- Choice of .30 cal (5/8" threads) or .22 cal (1/2" threads)
- Reduces recoil and muzzle rise
- Low-glare nitride finish has a dark slate grey colour
Model: Maple Ridge Armoury MRADB223
We recommend a screwdriver with a few wraps of duct tape around the shaft - insert through the 'gills' of the brake and then twist on to crush the washer and keep it all straight and tight. Just ensure that you don't turn too far - if you back off you will need a new crush washer! See pic for correct install orientation.
Spare crush washers and spare jam nuts available.