Hogue rubber grips are moulded from durable synthetic rubber that is neither spongy nor tacky yet provides a soft recoil absorbing feel without affecting accuracy. This modern rubber requires a completely different moulding process than ordinary neoprene resulting in a much superior grip. The flexibility of our materials and moulding process has allowed us to produce rubber grips with features that out perform all other makes.
Features and Specifications:
Fits: Smith & Wesson J Frame Round Butt
Models: 30, 32, 33, 34, 36, 37, 38, 43, 49, 50, 51, 60, 63, 317, 331, 337, 351PD, 360, • 431PD, 631, 637, 638, 649, 650, 651.
6. Insert the mounting screw through the hole on the bottom of the grip. Insert the screw to it enters the stirrup threads, and using an appropriate screwdriver, tighten the screw until snug, no tighter. Over-tightening does nothing to increase grip tightness and can damage the screw or stirrup.
7. Your Monogrip is designed to fit an average size firearm frame. However, frame dimensions do vary slightly from firearm to firearm. If necessary, your monogrip can be adjusted by placing small shim(s) of tape on the lower corner of the front strap. Add or subtract tape until grip is flushed with backstrap.
Model: Hogue 60000