Ruger 10-22 is one of the most fun rifles to own - personalising them
is nearly as much fun as shooting them! Our OverMolded 10-22 stock is
the finest and most functional stock made for this rifle. Hogue
10-22 stocks come equipped with sling swivel studs and feature simple
drop-in installation with models available to fit either standard or
heavy target barrels.
Hogue Ruger 10-22 Tactical Thumbhole OverMolded Rubber Rilfe Stock adds
tremendous improvements in shooting comfort, accuracy and overall
control of your rifle. The stock features OverMolded rubber on the
exterior, with cobblestone texturing, to provide a secure, non-slip
hold, and is also quiet in the field. The thumbhole and raised cheek
piece design is optimized for use with optical sights. The included
sling swivel studs provide the quick attachment of an aftermarket rifle
sling. The Hogue Tactical Thumbhole OverMolded Rubber Stock uses the
original 10/22 stock attachment screw, and does not use the original
barrel band; the barrel channel measures .920". Length of pull: 14.25".
revolutionary O.M. Series stocks are constructed so that the action
fits rock-solid in a rigid fiberglass reinforced insert (skeleton),
assuring accuracy. This insert is completely Overmolded with a soft, but
durable, rubber, giving that comfortable resilient feel that Hogue is
stocks incorporate every desirable feature a stock should have! And, we
have added a few Hogue touches along the way, creating a much
superior and unique stock compared with anything else on the market
Features and Specifications:
Sleek free float forend design
Cheek weld for optical sights
Comfortable thumb hole design
Unique bench rest hook for stabilized, accurate long range shooting
Ambidextrous palm swells
Sling studs included
Anti-snag heel butt pad - Modifiable butt pad can be shortened for shorter desire length of pull
Colour: Flat Dark Earth
Weight: 2 lb, 6 oz
Length of Pull: 14 1/4"
Lowest part of comb 1/8” below center line and the highest part (at rear part) 1/8" above center line
Drop at heel is 1" below center line of barrel
Stock channel measures 1.055" at receiver and 1.055" at tip of forend.
Distance between sling holes is 25"
Fits: Ruger 10-22 Bull Barrel
Ruger 10/22 Rifles:
Before starting to work, make sure rifle is unloaded, check magazine, and check chamber.
Remove barrel band (if any) from forend of stock. Remove the single screw from the underside of forend.
Before trying to remove the action, center safety button halfway between on and off. Then, by grasping barrel, lift up and forward.
action into new stock in reverse order, paying attention to properly
seating the "Action Lug" into corresponding recess in the stock. The
safety button must be centered to allow installation.
Reinstall the original screw and tighten firmly. The barrel band is not used.