1. Home
  2. Accessories
  3. Tools & Other Accessories

Products [269]

Sort by:
FROGLUBE OPTX SYSTEM KIT - LENS CLEANING
This Froglube Optics kit is a complete optics care system to clean all your scopes, binoculars, cameras and glasses.
$19.95
In Stock.
FROGLUBE CLP FROGWIPES - 8
FrogLube Frogwipes are in convenient sheets to clean deep into the spaces of your firearm. Makes cleaning and maintenance of all your handguns, shotguns and rifles quick and easy.
$10.95
In Stock.
FILTER, RED - FITS ACEBEAM T36
High quality red glass filter set in a black aluminum threaded surround screws into the threaded bezels of the Acebeam T36. FR50R.
$13.95
In Stock.
FILTER, GREEN - FITS ACEBEAM T36
High quality green glass filter set in a black aluminum threaded surround screws into the threaded bezels of the Acebeam T36. FR50G.
$13.95
In Stock.
FILTER, WHITE DIFFUSER - FITS ACEBEAM L16; EC50 GEN I, II, III; EC60
High quality, 40mm white glass filter/diffuser in a black aluminum threaded surround screws into the threaded bezels of the Acebeam L16, EC50, EC50 Gen II, EC50 Gen III and EC60. FR30W.
$14.95
In Stock.
FILTER, RED - FITS ACEBEAM L30, L30 GEN II, K30
High quality, 48mm red glass filter set in a black aluminum threaded surround screws into the threaded bezels of the Acebeam L30, L30 Gen II or K30. FR40R.
$23.95
In Stock.
FILTER, GREEN - FITS ACEBEAM L30, L30 GEN II, K30
High quality, 48mm green glass filter in a black aluminum threaded surround screws into the threaded bezels of the Acebeam L30, L30 Gen II or K30. FR40G.
$23.95
In Stock.
FILTER, GREEN - FITS ACEBEAM L16; EC50 GEN I, II, III; EC60
High quality, 40mm green glass filter in a black aluminum threaded surround screws into the threaded bezels of the Acebeam L16, EC50, EC50 Gen II, EC50 Gen III and EC60. FR30G.
$14.95
In Stock.
FILTER, ORANGE - FITS ACEBEAM L16; EC50 GEN I, II, III; EC60
High quality, 40mm orange glass filter in a black aluminum threaded surround screws into the threaded bezels of the Acebeam L16, EC50, EC50 Gen II, EC50 Gen III and EC60. FR30O.
$14.95
In Stock.
M1911A1 (1911) TECHNICAL MANUAL REPRINT
This is a "direct and general support maintenance manual" for the .45 caliber (sic) M1911A1 pistol - reprinted from TM 9-1005-211-34 - the 1964 manual. It also includes supplemental material from the Army Technical Manual TM 9-1005-211-12. Colonel Mustard CM1911A1Man.
$7.95
In Stock.
CRUSH WASHER SIZED FOR AR-15 OR OTHER 5.56 / .223 / 9MM - FITS OVER STANDARD 1/2
Steel Crush Washer for neat fitting of muzzle brake / compensator to AR-15 or other 5.56 / .223 / .22 / 9mm rifles, carbines or pistols utilising standard 1/2"x28 or 1/2"x36 thread. CMARMBCW.
$2.95
In Stock.
CRUSH WASHER SIZED FOR AR-10 OR OTHER 7.62 / .308 - FITS OVER STANDARD 5/8
Steel Crush Washer for neat fitting of muzzle brake / compensator / flash hider to AR-10, LR 308 or other 7.62 / .308 rifles utilising standard 5/8"x24 thread. Colonel Mustard CMARMBCW308.
$2.95
In Stock.
CRUSH WASHER SIZED FOR VZ-58 / CZ-858 / AK - FITS OVER STANDARD M14x1 THREAD
Steel crush washer for neat fitting of muzzle brake / compensator to VZ-58 / VZ 58 / CZ-858 / CZ 858 / AK or other rifles utilising standard M14x1 thread. CMARMBCWM14.
$2.95
In Stock.
STAINLESS CRUSH WASHER - FITS OVER STANDARD 1/2
Stainless Steel Crush Washer for neat fitting of muzzle brake / compensator to AR-15 or other 5.56 / .223 / .22 / 9mm rifles, carbines or pistols utilising standard 1/2"x28 or 1/2"x36 thread. CMARMBCWSS.
$2.95
In Stock.
STAINLESS CRUSH WASHER - FITS OVER STANDARD 5/8
Stainless Steel Crush Washer for neat fitting of muzzle brake / compensator to AR-10 or other 7.62 / .308 rifles using standard 5/8"x24 thread. CMARMBCWSS308.
$2.95
Out of Stock.
AR-15 SLING ADAPTER - BUFFER TUBE ENDPLATE, AMBIDEXTROUS, 1 POINT or 2 POINT SLING
Great value sling adapter / buffer tube endplate for M4 / AR-15. Robust steel adapter will allow you to attach your sling to either side of the rifle. CMARSAA1.
$13.95
Out of Stock.
AR-15 / M16 / M4 ACCUWEDGE-STYLE BUFFER
Tough, high-density synthetic rubber wedge drops into the space behind the takedown pin in the lower to provide tension between the halves and prevent movement. Fastest and simplest accuracy improvement device for your AR / M-16 / M4. Colonel Mustard CMAW01.
$3.95
Out of Stock.
BUFFER TUBE - MILSPEC
Colonel Mustard budget milspec aluminum buffer tube, black - use for an AR build or for your Matador Arms Sabertooth. CMBTMS.
$24.95
In Stock.
EXECUTIVE ICE SCRAPER
Perfect for Canadian windshields! This Executive Ice Scraper is tough enough to get through an Albertan winter. Black, strong and lightweight. Colonel Mustard CMCIA2.
$4.95 $3.95 Sale
In Stock.
CIA SPIKE
The CIA spike is made of a dense, durable, non-metallic, non-magnetic polyresin. Perfect as a backup for defence against animals in the backcountry. Black, strong and lightweight. Colonel Mustard CMCIA3.
$4.95
In Stock.
CASTLE NUT - STEEL
Colonel Mustard steel castle nut for attaching milspec and commercial spec AR buffer tubes - for AR builds! CMCNS.
(1)
$2.95
Out of Stock.
THREAD PROTECTOR - ALUMINUM - 1/2
Colonel Mustard thread protector. An elegant and useful item to protect your threaded barrel for when you don't want to use a muzzle brake or flash hider. Screws onto standard AR-15/M4/M16 ½" x 28 threaded barrels. This thread is also commonly used on .22 LR, .22 Mag and .17 HMR rifles. CMJLN-T001MB.
$7.95
In Stock.
THREAD PROTECTOR - ALUMINUM - 5/8
Colonel Mustard thread protector. An elegant and useful item to protect your threaded barrel for when you don't want to use a muzzle brake or flash hider. Screws onto 5/8" x 24 threaded barrels. CMJLN-T002MB.
$7.95
In Stock.
THREAD PROTECTOR - STEEL - 1/2
Colonel Mustard thread protector. A useful item to protect your threaded barrel for when you don't want to use a muzzle brake or flash hider. Screws onto standard AR-15/M4/M16 ½" x 28 threaded barrels. This thread is also commonly used on .22 LR, .22 Mag and .17 HMR rifles. CMMB57223MB.
$9.95
Out of Stock.
JAM NUT / LOCKNUT - STEEL - 1/2
Colonel Mustard jam nuts / lock nut. Use as an alternative to a crush washer to lock your muzzle brake or flash hider in place. Screws onto standard AR-15/M4/M16 ½" x 28 threaded barrels. This thread is also commonly used on .22 LR, .22 Mag and .17 HMR rifles. CMMB75-1/2x28JN.
$4.95
In Stock.
JAM NUT / LOCKNUT - STEEL - M14 x 1 THREAD (LH)
Colonel Mustard jam nuts / lock nut. Use as an alternative to a crush washer to lock your muzzle brake or flash hider in place. Screws onto M14 x 1 (LH) threaded barrels. This has a left hand thread for AKs or similar. CMMB75-M14LHJN.
$4.95
In Stock.
JAM NUT / LOCKNUT - STEEL - M14 x 1 THREAD (RH)
Colonel Mustard jam nuts / lock nut. Use as an alternative to a crush washer to lock your muzzle brake or flash hider in place. Screws onto M14 x 1 (RH) threaded barrels. This has a right hand (RH) thread for VZ-58/CZ-858 or similar. CMMB76-M14RHJN.
$4.95
In Stock.
JAM NUT / LOCKNUT - STEEL - M15 x 1 THREAD (RH)
Colonel Mustard jam nuts / lock nut. Use as an alternative to a crush washer to lock your muzzle brake or flash hider in place. Screws onto M15 x 1 (RH) threaded barrels. CMMB76-M15RHJN.
$4.95
In Stock.
JAM NUT / LOCKNUT - STEEL - 5/8
Colonel Mustard jam nut / lock nut. Use as an alternative to a crush washer to lock your muzzle brake or flash hider in place. Screws onto 5/8" x 24 threaded barrels. CMMB76-5/8x24JN.
$4.95
In Stock.
ROAD SPIKE CALTROPS - BOX OF 10
Ninja Road Spike Caltrops always land with a spike up! 10 to a box, Black steel, 1-11/16" across. Colonel Mustard CMNJ-6.
$7.95 $6.95 Sale
In Stock.
GERBER SHORT STACK FIREARM MAINTENANCE TOOL - BLACK
The Short Stack maintenance tool is always on hand - compactly fitting within Magpul, MOE and MIAD pistol grips. The three-piece design is completely magnetic, for convenient assembly and customization of the 15 different wrench configuration options. Maintain your rifle from the inside out. Gerber 31-002997N.
$69.95
In Stock.
HIPERFIRE ENHANCED DUTY (EDT) SHARP SHOOTER TRIGGER ASSEMBLY
Enhanced Duty Trigger (EDT) Sharp Shooter - a single-stage trigger and an exceptional upgrade for your rifle. HIPERFIRE's EDT triggers are engineered to be smooth, accurate and include features of higher tiered trigger designs. Includes two springs for the user to choose a 4.5 or 5.5 lb pull weight. HIPERFIRE EDTSS.
$149.95
Out of Stock.
MRA M-LOK PICATINNY RAIL - 5 SLOT
Maple Ridge Armoury M-LOK® Picatinny (5 Slot) Accessory rail, mounts onto M-LOK Spec. handguards. Made in Canada. Easy install. Black. MRAMAL5.
$22.95
Out of Stock.
MRA M-LOK PICATINNY RAIL - 7 SLOT
Maple Ridge Armoury M-LOK® Picatinny (7 Slot) Accessory rail, mounts onto M-LOK Spec. handguards. Made in Canada. Easy install. Black. MRAMAL7.
(1)
$24.95
Out of Stock.
MRA MATCH SERIES STAINLESS STEEL FLUTED BARREL MID GAS - 18.6
Maple Ridge Armoury Match Series Stainless Steel Fluted SPR Profile Barrel - 18.6", Mid gas system, chambered in .223 Wylde. Uses .223 Remington and 5.56 NATO cartridges. Made in Canada. Bead blasted stainless steel. MRAMS186MIDSTBRL223.
$399.95
Out of Stock. Free Shipping.
MRA MATCH SERIES STAINLESS STEEL FLUTED BARREL RIFLE GAS - 18.6
Maple Ridge Armoury Match Series Stainless Steel Fluted SPR Profile Barrel - 18.6", Rifle gas system, chambered in .223 Wylde. Uses .223 Remington and 5.56 NATO cartridges. Made in Canada. Bead blasted stainless steel. MRAMS186RIFLESTBRL223.
$389.95
Out of Stock. Free Shipping.
MRA PINCER LOW PROFILE GAS BLOCK - 0.750
Essential for mounting a free-float handguard and this one can't get any lower profile or clamp to your barrel any tighter! AISI 4140 Steel. QPQ Black Nitride. 0.750" Diameter. Complete with roll pin for attaching your gas tube. MRAPGB750.
$69.95
Out of Stock.
MRA STAINLESS STEEL GAS TUBE
Maple Ridge Armoury Stainless Steel Gas Tube. Constructed of US Milspec 304 Stainless Steel.
$19.95
In Stock.
MRA M-LOK QD SLING MOUNT
Maple Ridge Armoury M-LOK® QD Sling Mount, mounts onto M-LOK Spec. handguards. Made in Canada. Easy install. Black. MRMQDMNT.
$22.95
Out of Stock.
MAG-ROTOR - RUGER 10/22 MAGAZINE CLAMP
No longer available - see link for TRIMAG below...
$39.95
Not for Sale.
X-PRESS - RUGER 10/22 MAGAZINE RELEASE
Matador Arms Aluminum X-Press Mag Release for all Ruger 10/22 (1022) variants. Release magazines faster and easier. Ambidextrous. MAC1022XP (MAC737).
$54.95
Not for Sale.
GLOCK MAGAZINE BASE PAD - ALUMINUM - ON SALE
For Glock pistol mags in 9mm or .40 (except G19). 'Unfair Advantage' Open-Class magazine base pad. Anodised black or red billet aluminum. CMUAGBPB.
(1)
$29.95
Out of Stock.
GUN CLEANING BRUSH AND PICK SET
Three cleaning brushes in nylon, brass and copper plus two non-marking plastic picks for cleaning all guns and parts. Includes: 1Pc Double Ended Brass Brush; 1Pc Double Ended Copper Brush; 1Pc Double Ended Nylon Brush; 2Pc Double Ended Pick. SE 7624BC-5.
$8.95
In Stock.
10/22 ALUMINUM EXTENDED MAGAZINE RELEASE - BLACK
Timber Creek Outdoors Extended Magazine Release is designed for quick and easy release so that your focus can stay on targets down range while easily and instinctively changing mags. Compatible with all variances of the Ruger 10/22. Made in the USA. Lifetime Warranty. Black Type III Hard anodised billet aluminum. TCO 10/22 EMR BL.
$29.95
In Stock.
10/22 ALUMINUM EXTENDED MAGAZINE RELEASE - FLAT DARK EARTH
Timber Creek Outdoors Extended Magazine Release is designed so that your focus can stay on targets down range while easily and instinctively changing mags. Compatible with all variances of the Ruger 10/22. Made in the USA. Lifetime Warranty. Flat Dark Earth (FDE) Cerakote finish billet aluminum. TCO 10/22 EMR FDE.
$29.95
In Stock.
TOP